Cactus AF45 Instruction Manual download pdf (Page 14)

Power Saving Function

If there is no communication between the flash and the

camera for around 3 minutes, the flash will automatically

switch to power saving mode in order to save battery

power. "OFF" sign will appear in the LCD. The Ready light

will be off while in power saving mode. To reactivate the

flashgun, press any push buttons underneath the LC

display panel or switch the main switch off and on again.

The flashgun is not completely switched off in power

saving mode. However, power consumption is drastically

reduced. If you are not going to use your flashgun for a

while, we recommend you to turn the flash off.

Troubleshooting

Check that AA Alkaline battery is used (not mercury or

lithium-ion) and that the batteries have not run out.

Make sure that the flash’s On/Off button has been

switched to "On".

Double check that all plastic battery wrapping has been

removed and that the battery is installed to the correct

polarity.

Switch the power dial to 1/16 power and press the Test

button for test fire.

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

Cactus AF45 Instruction Manual Page 14